MASSIS AMERYAH
Key facts
Usages:
- floor covering as a protective layer
- Marble fixing
- Additives for sand & cement mortars to accelerate setting time
Advantages :
- fast setting stucco
- Pre-mixed powder -only addition of water is required
- economic
Application
Preparation
'Substrate must be sound, free from dust, loose particles, cement laitance, curing compounds, oil, grease or any other contamination
Ensure the mixing container and the application tools are clean especially form waste of previous mix and it’s recommended to clean the tools directly after usage
Mixing
“Massis Ameryah” is sprayed on water with the right ratios (Don’t add water to powder), then leave for 2 mins till it soaks completely. Stir the mix perfectly in all directions till reaching a homogeneous mortar with the convenient consistency for the application. It is preferred to use mechanical mixing
Application
After preparation and mixing, apply the "Massis Ameryah" for the required purpose
Extra information
Technical Data Sheet :
| Wet Density | 1500 gm/l |
| PH Value | neutral |
| Workability Time | 3 -7 mins |
| Initial Setting time | 10 -15 mins |
| % Mixing water | 80% |
| Whiteness | ≥89 |
Storage & Packing
Pack / Kg : 30.3
Packs / Ton : 33
Storage Conditions : Must be stored in a dry area away from the reach of humidity or any water source, preferably on wooden pallets and covered with impermeable cover to maintain a steady quality the longest duration possible
Storage Validity : 3 months
Standards : Gypsum Building Plaster (B1) with an initial setting time <20 min and compressive strength ≥ 2,0 N/mm2
GYPSUM BUILDING PLASTER
EN 13279-1 - B1/20/2