Image
AL BALLAH
"Al-Ballah" is a traditional gypsum binder extracted from Ballah quarry used for multi-application -non structural civil works- such as floor covering, additives for sand & cement mortars, marble fixing etc….
Usages:
floor covering as a protective layer
Marble fixing
Additives for sand & cement mortars to accelerate setting time
Usages:
floor covering as a protective layer
Marble fixing
Additives for sand & cement mortars to accelerate setting time
Read more
Read less
AL BALLAH
Key facts
fast setting stucco
Pre-mixed powder -only addition of water is required
economic
Application
Preparation
Substrate must be sound, free from dust, loose particles, cement laitance, curing compounds, oil, grease or any other contamination
Mixing
“Al-Ballah” is sprayed on water with the right ratios (Don’t add water to powder), then leave for 2 mins till it soaks completely. Stir the mix perfectly in all directions till reaching a homogeneous mortar with the convenient consistency for the application. It is preferred to use mechanical mixing
Application
After preparation and mixing, apply the Ballah for the required purpose
Extra information
Technical Data
| Wet Density | 1500 gm/l |
| PH Value | neutral |
| Workability Time | 3 - 5 mins |
| Initial Setting time | 10 -15 mins |
| % Mixing water | 75 - 80 % |
| Whiteness | '≥86 |
Storage & Packing
|
30.3 | |
| Packs / Ton | 33 | |
| Storage Conditions | Must be stored in a dry area away from the reach of humidity or any water source, preferably on wodden pallets and covered with impermeable cover to mainatain a steady quality the longest duration possible | |
| Storage Validity | 3 months |